Phone:

+91 98980 43125

Capacity 350T/C2600

Injection Moulding Machine

We know how diverse the requirements of our customers and the products they produce are. At Dolphin Plast India Pvt.Ltd, we see ourselves as a total solution provider. We support our customers in their challenges. Our injection moulding machines stand for efficiency, quality and reliability.

Share with us your requirements

Capacity: From 350T/C2600

Injection Unit

Parameter	Unit	350TC 2600 (A)	350TC 2600 (B)	350TC 2600 (C)
Screw Diameter	mm	65	70	75
Screw L/D Ratio	L/D	23.4	21.7	20.2
Theoretical Injection Volume	cm³	1161	1347	1546
Shot Weight (PS)	gm	1057	1226	1407
Max. Injection Rate into Air	cm³/s	327	379	436
Max. Injection Rate into Air	g/s	298	345	397
Max. Injection Pressure	kg/cm²	2200	1950	1660
Theoretical Plasticizing Rate	g/s (PS)	44	61	74.5
Screw Stroke	mm	350
Max. Injection Speed	mm/s	100
Max. Screw Speed	rpm	180
Hydromotor Size	cc	1301

Clamping Unit

Parameter	Unit	Specification
Clamping Force	Ton	350
Opening Stroke	mm	670
Space Between Tie Bars H × V	mm × mm	730 × 680
Platen Size H × V	mm × mm	1060 × 1010
Min. Mould Height	mm	280
Max. Mould Height	mm	750
Max. Daylight	mm	1420
Ejector Stroke	mm	180
Ejector Force Forward	kN	120
Number of Ejector Bar	Nos	1 + 12
Locator Ring Diameter	mm	160

General / Electrical

Parameter	Unit	Value
System Pressure	Kg/Cm²	175
No. Of Motors	No.	1
Pump Motor Power	kW	38.8
Heater Power	kW	20.3
Total Connected Load	kW	59.1
No. of Temp. Control Zone	No.	4+1

Other Details

Parameter	Unit	Value
Hopper Capacity	Kg	50
Oil Tank Capacity	L	420
Machine Dimensions (L × W × H)	Mtr	7.3 × 1.93 × 2.1
Machine Weight	Ton	13.1

Our USP

INJECTION UNIT

Special Joint, Linear Guide Structure, The Flip-up Nozzle Protective Cover, Dual Robust Carriage Structure
Hopper Sliding Plate with Bearing
Balance Support Structure
High Pressure Hosses
The Screw Tip, Ring & Screw Washer are made from Imported high quality materials SKD61
5-Point double toggle with excellent kinematics to offer smooth movement of moving platen

Capacity: From 120 ton to 1150 ton

CLAMPING UNIT

Longer and wider guide support, higher repeat accuracy, improving molded product quality and molds lifespan largely.
Larger space between e bar, adaptable to more sizes of molds and multi-cavity demands.
Key guiding parts for e bar, ejectors are upgraded with graphite copper bushes And self-lubricant alloy sliding plate are used on the movable platen and rear platen. Mold opening and locking is fast and precise.
The overall mechanical rigidity far exceeds that of other suppliers, which not only improves the service life of the machine, but also effectively protects the mold.
The mechanical structure and connecting rod design are more optimized, the running speed is faster, more stable, and the efficiency is improved.

Capacity: From 120 ton to 1150 ton

ELECTRIC UNIT

The machine program is are designed according to European safety standards to ease of operation.
It can realize modernized computer network management as well as data docking to user’s MES system.
High quality color LCD controller are developed with the power system manufacturers. It has faster response by beer coordination with power system.
Emergency push button both side for safety.

Capacity: From 120 ton to 1150 ton

HYDRAULIC UNIT

Equipped with precise energy-saving servo system, saving more than 40%-50% energy compared with traditional injection Molding machine.
Use DIN standard cone seal fings and valve plates with G thread sealing plug to prevent oil polluon.
Hydraulic system adopts modular design to improve system flexibility.
Imported well- known brand hydraulic components are used to ensure the reliability and quick response of the machine.

Capacity: From 120 ton to 1150 ton

Let’s Work Together

Reach out to us and our team will get back to you with the right solution

1 Step 1

Previous

Next

FormCraft - WordPress form builder